[Next Message in Time] |
[Previous Message in Time] |
[Next Message in Topic] |
[Previous Message in Topic]
Message ID: 395
Date: Wed Jun 2 13:13:38 BST 1999
Author: Tom Wang
Subject: Re: Voodoo3 2000
----- Original Message -----
From: Nick <brutalny@...>
To: <EverQuest@onelist.com>
Sent: Wednesday, June 02, 1999 7:02 AM
Subject: Re: [EverQuest] Voodoo3 2000
> From: "Nick" <brutalny@...>
>
> I got a voodoo3 2000 pci (i have an old k6-2 300 mhz so no agp slots) for
> the one reason that all the other 3d cards out there need agp slots. It
has
> worked great the speed is excellent, I've had no problems and i think you
> should get one. if you do get one don't get the stb one, it is just a
cheap
> version of the 3dfx one. make sure it is a 3dfx voodoo3, stb uses 3dfx
> chips on cheap boards. i used to have a tnt and voodoo3 blows it out of
the
> water, not to mention voodoo3 is so much easier to use and install that
tnt2
> is not even worth the purchase. at least until about 2 years, but by then
> i'm sure 3dfx will have another 32 bit card out.
> ----- Original Message -----
> From: <EverQuest@onelist.com>
> To: <EverQuest@onelist.com>
> Sent: Wednesday, June 02, 1999 3:33 AM
> Subject: [EverQuest] Digest Number 60
>
>
> >
> > Looking to expand your world?
> > http://www.onelist.com
> > ONElist has nearly 160,000 e-mail communities from which to chose!
> > ------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> > There are 17 messages in this issue.
> >
> > Topics in today's digest:
> >
> > 1. Re: rts and skull of jhen tra
> > From: "Whitmore, Lance" <lwhitmore@...>
> > 2. Re: rts and skull of jhen tra
> > From: "Tom Wang" <twang@...>
> > 3. Re: rts and skull of jhen tra
> > From: "Whitmore, Lance" <lwhitmore@...>
> > 4. Re: rts and skull of jhen tra
> > From: "Shane Bole" <shane0009@...>
> > 5. Re: rts and skull of jhen tra
> > From: "Tom Wang" <twang@...>
> > 6. Voodoo3 2000, System, Cable Modem
> > From: blizzard15@...
> > 7. Re: Voodoo3 2000, System, Cable Modem
> > From: Chris_Mattos@...
> > 8. New version of the High Pass Hold map
> > From: "Whitmore, Lance" <lwhitmore@...>
> > 9. Re: Voodoo3 2000, System, Cable Modem
> > From: "Trevor Gray" <xenogear@...>
> > 10. Re: Digest Number 59
> > From: "Thormael LGT" <thormael@...>
> > 11. Re: Voodoo3 2000, System, Cable Modem
> > From: troy <troy@...>
> > 12. Re: Looking for Item
> > From: "Cillo, Christopher L." <CLCILLO@...>
> > 13. Re: Voodoo3 2000, System, Cable Modem
> > From: "Daniel P. Sniderman" <slide@...>
> > 14. Re: rts and skull of jhen tra
> > From: "Shane Bole" <shane0009@...>
> > 15. Re: Changing Resolution
> > From: "Steve Graham" <sdgraham@...>
> > 16. Re: Changing Resolution
> > From: Michael_Wyatt@...
> > 17. Re: Digest Number 59
> > From: BobbiS7@...
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 1
> > Date: Tue, 1 Jun 1999 09:12:26 -0400
> > From: "Whitmore, Lance" <lwhitmore@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > its not a rumor... ive seen to Players running around in Crushbone
> weilding
> > a staff with a skull on the end of it... just like the priest of
discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can be used
> > together/in conjunction with each other, yet there is no obvious way to
do
> > this. Is this information wrong, or am I just missing something?
Thanks
> in
> >
> > advance.
> > Jannus
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
> > ------------------------------------------------------------------------
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the Internet.
> > ------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 2
> > Date: Tue, 1 Jun 1999 08:34:33 -0500
> > From: "Tom Wang" <twang@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > RE: [EverQuest] rts and skull of jhen traIts called Staff of Writhing or
> Writhing Staff and is 1 (one) hand blunt. Its gotten in a really really
> tough place for 30 + people. Its stats are awesome of course, however, we
> clerics cannot use it. Its restricted to true casters like wizards and
> enchanters. Which is too bad as most of them suck at 1h blunt.
> > ----- Original Message -----
> > From: Whitmore, Lance
> > To: 'EverQuest@onelist.com'
> > Sent: Tuesday, June 01, 1999 8:12 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > its not a rumor... ive seen to Players running around in Crushbone
> weilding a staff with a skull on the end of it... just like the priest of
> discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can be
used
> > together/in conjunction with each other, yet there is no obvious way
to
> do
> > this. Is this information wrong, or am I just missing something?
> Thanks in
> > advance.
> > Jannus
> >
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
>
------------------------------------------------------------------------
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the Internet.
>
------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 3
> > Date: Tue, 1 Jun 1999 09:49:09 -0400
> > From: "Whitmore, Lance" <lwhitmore@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > pulled this from the EQ'Lizer website:
> >
> >
> >
> > Staff of Writhing
> >
> >
> > The staff of writhing is one of the various skull staff's in the
> game(which
> > look similar to the staff that the Priest of Discord is equipping). This
> > particular staff is a 1 handed blunt weapon and can be equipped by
> > Necromancers, Enchanters, Wizards, Magicians and Bards. It has a damage
of
> > 9, a delay of 33 and has the effect of chaotic feedback(which does 48
> points
> > of damage when successful).
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Tom Wang [mailto:twang@...]
> > Sent: Tuesday, June 01, 1999 9:35 AM
> > To: EverQuest@onelist.com
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > Its called Staff of Writhing or Writhing Staff and is 1 (one) hand
blunt.
> > Its gotten in a really really tough place for 30 + people. Its stats are
> > awesome of course, however, we clerics cannot use it. Its restricted to
> true
> > casters like wizards and enchanters. Which is too bad as most of them
suck
> > at 1h blunt.
> >
> > ----- Original Message -----
> > From: Whitmore, Lance
> > To: 'EverQuest@onelist.com'
> > Sent: Tuesday, June 01, 1999 8:12 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > its not a rumor... ive seen to Players running around in Crushbone
> weilding
> > a staff with a skull on the end of it... just like the priest of
discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [ mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can be used
> > together/in conjunction with each other, yet there is no obvious way to
do
> > this. Is this information wrong, or am I just missing something? Thanks
in
> >
> > advance.
> > Jannus
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
> > ------------------------------------------------------------------------
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the Internet.
> > ------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 4
> > Date: Tue, 1 Jun 1999 11:42:06 -0400
> > From: "Shane Bole" <shane0009@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > RE: [EverQuest] rts and skull of jhen trado you know where I can get it?
> > seems the enchanter class might be useful after all...
> > ----- Original Message -----
> > From: Tom Wang
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 9:34 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > Its called Staff of Writhing or Writhing Staff and is 1 (one) hand
> blunt. Its gotten in a really really tough place for 30 + people. Its
stats
> are awesome of course, however, we clerics cannot use it. Its restricted
to
> true casters like wizards and enchanters. Which is too bad as most of them
> suck at 1h blunt.
> > ----- Original Message -----
> > From: Whitmore, Lance
> > To: 'EverQuest@onelist.com'
> > Sent: Tuesday, June 01, 1999 8:12 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > its not a rumor... ive seen to Players running around in Crushbone
> weilding a staff with a skull on the end of it... just like the priest of
> discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can be
> used
> > together/in conjunction with each other, yet there is no obvious way
> to do
> > this. Is this information wrong, or am I just missing something?
> Thanks in
> > advance.
> > Jannus
> >
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
>
----------------------------------------------------------------------
> --
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the Internet.
>
----------------------------------------------------------------------
> --
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 5
> > Date: Tue, 1 Jun 1999 10:57:20 -0500
> > From: "Tom Wang" <twang@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > RE: [EverQuest] rts and skull of jhen traI'll say this, its not for
> newbies. One of the toughest places in the game.
> >
> > ----- Original Message -----
> > From: Shane Bole
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 10:42 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > do you know where I can get it?
> > seems the enchanter class might be useful after all...
> > ----- Original Message -----
> > From: Tom Wang
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 9:34 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > Its called Staff of Writhing or Writhing Staff and is 1 (one) hand
> blunt. Its gotten in a really really tough place for 30 + people. Its
stats
> are awesome of course, however, we clerics cannot use it. Its restricted
to
> true casters like wizards and enchanters. Which is too bad as most of them
> suck at 1h blunt.
> > ----- Original Message -----
> > From: Whitmore, Lance
> > To: 'EverQuest@onelist.com'
> > Sent: Tuesday, June 01, 1999 8:12 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > its not a rumor... ive seen to Players running around in
Crushbone
> weilding a staff with a skull on the end of it... just like the priest of
> discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can be
> used
> > together/in conjunction with each other, yet there is no obvious
way
> to do
> > this. Is this information wrong, or am I just missing something?
> Thanks in
> > advance.
> > Jannus
> >
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
>
--------------------------------------------------------------------
> ----
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the
Internet.
>
--------------------------------------------------------------------
> ----
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 6
> > Date: Tue, 01 Jun 1999 11:32:40 -0500
> > From: blizzard15@...
> > Subject: Voodoo3 2000, System, Cable Modem
> >
> > I am building a new computer and I was wondering if any of you have had
> any
> > experience with the Voodoo3 2000. Does it give good enough performance
to
> > warrant buying it? Also would the following system give good performance
> on
> > EverQuest?
> >
> > Celeron 433
> > 128 MB PC100 SDRAM
> > Diamond Monster MX300
> > Abit BX6 Rev2
> > Maxtor 10.2GB 5400 RPM
> > Diamond SupraExress 56K Internal ISA
> >
> > Also I've been seeing that the Cable Modems aren't that good for EQ, but
I
> > was wondering how bad are they? Will they get at least better
performance
> > than a 56K? Answers to any of these questions would be very appreciated.
> >
> > -Blizzard
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 7
> > Date: 01 Jun 1999 12:51:36 -0400
> > From: Chris_Mattos@...
> > Subject: Re: Voodoo3 2000, System, Cable Modem
> >
> > A cable modem will do nothing to lower packetloss. What it will do is
> decrease ping time, which can lessen the impact of packetloss problems.
The
> only way to (hopefully) lessen packetloss problems is to try a different
ISP
> (which, subscribing to a cable modem service, you will accomplish). The
> main problem with cable modems, however, is that as more people in your
area
> subscribe to cable modem service, your connection quality will decrease.
> This is also true for dial up service, but to a far lesser extent since
they
> are low connection speed to begin with. As I will explain in a moment,
this
> is not as a real big problem. DSL, supposedly, does not have this
downfall.
> >
> > There were recent reports that the @Home service was experiencing all
> kinds of problems, including bad connections to the EQ servers. Not being
a
> cable modem subscriber, I do not know how true these reports are.
> >
> > The final thing to consider is that EQ is designed to work with clients
> using standard dial-up service. Dial-up customers are in the vast
majority
> so Sony/Verant, of course, are going to cater to them primarily. What
this
> means is a higher connection speed to the EQ servers will not gain you an
> unrealistic advantage since the EQ servers are not designed to take full
> advantage of high speed connections. What you will gain is a more
reliable
> connection (no hang-ups) and better ping (which, as mentioned above, can
> help lessen the impact of high packetloss). It will, of course, be a
faster
> connection to the EQ servers, just not as big a difference in speed as you
> would see surfing the web.
> >
> > As for the Voodoo3 card, I don't really know for sure. Connection speed
> is the bottleneck, so anything Voodoo2/TNT or better will be fine.
Voodoo3
> will probably be better than VooDoo2 (in EQ), but probably not as big a
> difference as going from Voodoo1 to Voodoo2. I run a VooDoo Banshee and I
> work fine.
> >
> > The rest of your system kicks, so I wouldn't worry about it much.
> >
> > Chris
> >
> >
> >
> > -----Original Message-----
> > From: blizzard15@...
> > [mailto:blizzard15@...]
> > Sent: Tuesday, June 01, 1999 12:37 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] Voodoo3 2000, System, Cable Modem
> >
> >
> > From: blizzard15@...
> >
> > I am building a new computer and I was wondering if any of you have had
> any
> > experience with the Voodoo3 2000. Does it give good enough performance
to
> > warrant buying it? Also would the following system give good performance
> on
> > EverQuest?
> >
> > Celeron 433
> > 128 MB PC100 SDRAM
> > Diamond Monster MX300
> > Abit BX6 Rev2
> > Maxtor 10.2GB 5400 RPM
> > Diamond SupraExress 56K Internal ISA
> >
> > Also I've been seeing that the Cable Modems aren't that good for EQ, but
I
> > was wondering how bad are they? Will they get at least better
performance
> > than a 56K? Answers to any of these questions would be very appreciated.
> >
> > -Blizzard
> >
> >
> > ------------------------------------------------------------------------
> > Having difficulty getting "in synch" with list members?
> > http://www.onelist.com
> > Try ONElist's Shared Calendar to organize events, meetings and more!
> > ------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 8
> > Date: Tue, 1 Jun 1999 12:59:15 -0400
> > From: "Whitmore, Lance" <lwhitmore@...>
> > Subject: New version of the High Pass Hold map
> >
> >
> > [This message contained attachments]
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 9
> > Date: Tue, 1 Jun 1999 10:59:50 -0700
> > From: "Trevor Gray" <xenogear@...>
> > Subject: Re: Voodoo3 2000, System, Cable Modem
> >
> > DONT get the Voodoo 3 anything go for a Nvidia Ultra Tnt2. I work at
> > CompUSA and have seen toooo many returns of the STB (yes STB makes the
> 3dfx
> > cards) crud..The Diamond 770 or thr Creative Ultra TNT2 is alot better
> deal.
> >
> > Trevor
> > ----- Original Message -----
> > From: <blizzard15@...>
> > To: <everquest@onelist.com>
> > Sent: Tuesday, June 01, 1999 9:32 AM
> > Subject: [EverQuest] Voodoo3 2000, System, Cable Modem
> >
> >
> > > From: blizzard15@...
> > >
> > > I am building a new computer and I was wondering if any of you have
had
> > any
> > > experience with the Voodoo3 2000. Does it give good enough performance
> to
> > > warrant buying it? Also would the following system give good
performance
> > on
> > > EverQuest?
> > >
> > > Celeron 433
> > > 128 MB PC100 SDRAM
> > > Diamond Monster MX300
> > > Abit BX6 Rev2
> > > Maxtor 10.2GB 5400 RPM
> > > Diamond SupraExress 56K Internal ISA
> > >
> > > Also I've been seeing that the Cable Modems aren't that good for EQ,
but
> I
> > > was wondering how bad are they? Will they get at least better
> performance
> > > than a 56K? Answers to any of these questions would be very
appreciated.
> > >
> > > -Blizzard
> > >
> > >
> >
> ------------------------------------------------------------------------
> > > Having difficulty getting "in synch" with list members?
> > > http://www.onelist.com
> > > Try ONElist's Shared Calendar to organize events, meetings and more!
> >
> ------------------------------------------------------------------------
> > > Visit the EverQuest homepage at http://www.everquest.com
> > >
> > >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 10
> > Date: Tue, 01 Jun 1999 11:15:18 PDT
> > From: "Thormael LGT" <thormael@...>
> > Subject: Re: Digest Number 59
> >
> > No it wasn't the glowing wooden crook, it looked exactly the same as the
> > priest of discord's. Two people in the group had it BTW, a mage type and
a
> > bard. I can't send a screenshot to those interested BTW, if you like
> > rubicite, well, you'll see some!
> >
> > Thormael
> >
> > > Date: Mon, 31 May 1999 09:59:00 -0400
> > > From: "Shane Bole" <shane0009@...>
> > >Subject: Re: rts and skull of jhen tra
> > >
> > >was it a big fat long staff that was kind of twisted?
> > >
> > >----- Original Message -----
> > >From: Thormael LGT <thormael@...>
> > >To: <EverQuest@onelist.com>
> > >Sent: Monday, May 31, 1999 5:47 AM
> > >Subject: Re: [EverQuest] rts and skull of jhen tra
> > >
> > >
> > > > From: "Thormael LGT" <thormael@...>
> > > >
> > > > Just to let you know : I saw a player (mage type) wielding this kind
> of
> > > > staff, he was kinda high level as he was grouped with rubicite
wearing
> > >other
> > > > ones, druid who was able to teleport the group around (they were at
a
> > > > druid's ring), etc.
> > > >
> > > > Don't know what this staff was, didn't ask, as I was camoed, running
> > >around
> > > > them taking screenshots. ;-)
> > > >
> > > > Thormael
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 11
> > Date: Tue, 1 Jun 1999 14:25:46 -0400 (EDT)
> > From: troy <troy@...>
> > Subject: Re: Voodoo3 2000, System, Cable Modem
> >
> >
> > On the other hand, I upgraded from an Nvidia TNT to a Voodoo3 3000 (AGP)
> > with 16MB onboard. I find the money well spent.
> >
> > On Tue, 1 Jun 1999, Trevor Gray wrote:
> >
> > > From: "Trevor Gray" <xenogear@...>
> > >
> > > DONT get the Voodoo 3 anything go for a Nvidia Ultra Tnt2. I work at
> > > CompUSA and have seen toooo many returns of the STB (yes STB makes the
> 3dfx
> > > cards) crud..The Diamond 770 or thr Creative Ultra TNT2 is alot better
> deal.
> > >
> > > Trevor
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 12
> > Date: Tue, 1 Jun 1999 14:59:01 -0400
> > From: "Cillo, Christopher L." <CLCILLO@...>
> > Subject: Re: Looking for Item
> >
> > It might be a summoned shield. You should be able to right click it and
> get
> > a description from it.
> >
> > Chris aka Thunderheart
> > Level 21
> > Wood-Elf
> > Druid
> > Innoruuk server
> > ---=== Divine Wind ===---
> >
> > -----Original Message-----
> > From: MFerrulo@... [mailto:MFerrulo@...]
> > Sent: Sunday, May 30, 1999 1:57 PM
> > To: Everquest@onelist.com
> > Subject: [EverQuest] Looking for Item
> > From: MFerrulo@...
> >
> > I have seen one PC and one NPC that have what looks like a glowing,
> flashing
> >
> > shield on thier left arm. When I inspected the PC with this flashing
> thing
> > going on, she had a "Light Globe" (not Lightstone) in one of her melee
> > slots,
> > so I assume it was not a shiled but rather a light source. I really
wanna
> > try to get one of these Light Globes. Any one know where I can?
> >
> > Wizaro
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 13
> > Date: Tue, 1 Jun 1999 14:56:30 -0500
> > From: "Daniel P. Sniderman" <slide@...>
> > Subject: Re: Voodoo3 2000, System, Cable Modem
> >
> > While I have to accept Trevor's observation on QC from STB - I have a V3
> > 2000 and its behaved flawlessly..
> >
> > I have a couple of comments to make:
> >
> > 1) From most research I've seen - the TnT2 Ultra is a greater performer
> than
> > the Vooodoo3 2000 - especially given the speeds they are clocked at.
The
> > TnT2 also will support 32-bit textures - which will make a HUGE
difference
> > that the 16-bit hardware that the Voodoo3 (22-bit in software but that
> will
> > cause another performance hit) Note that the 2000 is easily
overclockable
> > (but you'll need to add a fan). Note that as far as I know - there's
not
> a
> > single game out there now that supports above 16-bit textures so TODAY
> this
> > isn't an issue.
> >
> > On-the-other-hand:
> > The 2000 cost me $129 at Best Buy - the TnT2 Ultra will cost AT LEAST
$100
> > more than that (possibly more - I haven't been pricing them)
> > If you are on a budget this is huge. Also keep in mind - if you are
ONLY
> > playing Everquest - I've seen TONS of posts from people having problems
> with
> > the V770. Sounds like Diamond (Nvidia?) need to fix the driver for EQ.
My
> > 2000 has behaved flawlessly.
> >
> > Also - the Matrox G400 is out now as well a buddy of mine claims it
smokes
> > the TnT2 - but I haven't done research to verify this. If you can
afford
> > $250 list for a V770 Ultra or a Matrox G400 AND plan on playing games
> other
> > than EQ consider forgoing the V3 2000
> >
> > In my opinion - the 2000 is the best performer for the price (also - I
am
> > running a 300 MHz machine so I won't see a speed difference with the
> faster
> > cards anyway). But given Trevor's concern - save that receipt, packing
> > materials, etc in case you have to return a defective card. I haven't
had
> > ANY probs with the 2000 and am REALLY satisfied with it.
> >
> > 2) SOME I repeat SOME people how are on @Home cable modem service have
> > severely high Packet Loss problems with Everquest. MANY people on the
> same
> > company have no problems at all. If you are considering @home I would
> > recommend posting on alt.games.Everquest and the www.eqvault.com Tech
> > webboard asking for people in your exact area if they have problems. If
> > your cable is a different company I would sign up for cable as fast as
you
> > possibly can!
> >
> > Danny Sniderman
> >
> > ----- Original Message -----
> > From: Trevor Gray <xenogear@...>
> > To: <EverQuest@onelist.com>
> > Sent: Tuesday, June 01, 1999 12:59 PM
> > Subject: Re: [EverQuest] Voodoo3 2000, System, Cable Modem
> >
> >
> > > From: "Trevor Gray" <xenogear@...>
> > >
> > > DONT get the Voodoo 3 anything go for a Nvidia Ultra Tnt2. I work at
> > > CompUSA and have seen toooo many returns of the STB (yes STB makes the
> > 3dfx
> > > cards) crud..The Diamond 770 or thr Creative Ultra TNT2 is alot better
> > deal.
> > >
> > > Trevor
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 14
> > Date: Tue, 1 Jun 1999 17:53:14 -0400
> > From: "Shane Bole" <shane0009@...>
> > Subject: Re: rts and skull of jhen tra
> >
> > RE: [EverQuest] rts and skull of jhen trastarted my character a while
ago
> > so wheres the toughest place in the game?
> > ----- Original Message -----
> > From: Tom Wang
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 11:57 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > I'll say this, its not for newbies. One of the toughest places in the
> game.
> >
> > ----- Original Message -----
> > From: Shane Bole
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 10:42 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > do you know where I can get it?
> > seems the enchanter class might be useful after all...
> > ----- Original Message -----
> > From: Tom Wang
> > To: EverQuest@onelist.com
> > Sent: Tuesday, June 01, 1999 9:34 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > Its called Staff of Writhing or Writhing Staff and is 1 (one) hand
> blunt. Its gotten in a really really tough place for 30 + people. Its
stats
> are awesome of course, however, we clerics cannot use it. Its restricted
to
> true casters like wizards and enchanters. Which is too bad as most of them
> suck at 1h blunt.
> > ----- Original Message -----
> > From: Whitmore, Lance
> > To: 'EverQuest@onelist.com'
> > Sent: Tuesday, June 01, 1999 8:12 AM
> > Subject: Re: [EverQuest] rts and skull of jhen tra
> >
> >
> > its not a rumor... ive seen to Players running around in
> Crushbone weilding a staff with a skull on the end of it... just like the
> priest of discord.
> >
> > Duhase
> >
> > -----Original Message-----
> > From: Jannus Malus [mailto:jannus_@...]
> > Sent: Friday, May 28, 1999 2:35 PM
> > To: everquest@onelist.com
> > Subject: [EverQuest] rts and skull of jhen tra
> >
> >
> >
> > From: "Jannus Malus" <jannus_@...>
> >
> > I've heard that the runed totem staff and skull of jhen tra can
be
> used
> > together/in conjunction with each other, yet there is no obvious
> way to do
> > this. Is this information wrong, or am I just missing
something?
> Thanks in
> > advance.
> > Jannus
> >
> >
> >
> > _______________________________________________________________
> > Get Free Email and Do More On The Web. Visit http://www.msn.com
> >
>
------------------------------------------------------------------
> ------
> > Where do some of the Internet's largest email lists reside?
> > http://www.onelist.com
> > At ONElist - the most scalable and reliable service on the
> Internet.
>
------------------------------------------------------------------
> ------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 15
> > Date: Tue, 1 Jun 1999 18:37:50 -0700
> > From: "Steve Graham" <sdgraham@...>
> > Subject: Re: Changing Resolution
> >
> > i have a different kind of resolution problem...when i increase
> resolution,
> > it just makes the everquest window smaller on my monitor (with the
ensuing
> > negative border space increasing). anybody have an aswer for this one ?
> >
> > 4400 velocity STB 16meg Riva TnT
> > Viewsonic 17PS monitor
> >
> > thanks Gwin
> >
> >
> > -----Original Message-----
> > From: Tom Wang <twang@...>
> > To: EverQuest@onelist.com <EverQuest@onelist.com>
> > Date: Monday, May 31, 1999 11:22 PM
> > Subject: Re: [EverQuest] Changing Resolution
> >
> >
> > >From: "Tom Wang" <twang@...>
> > >
> > >simple, you're using old drivers. Goto www.3dfx.com and download the
> newest
> > >Voodoo 2 reference drivers. It will fix all your problems.
> > >
> > >----- Original Message -----
> > >From: Su-chan <chuguet@...>
> > >To: <EverQuest@onelist.com>
> > >Sent: Monday, May 31, 1999 2:54 AM
> > >Subject: [EverQuest] Changing Resolution
> > >
> > >
> > >> From: "Su-chan" <chuguet@...>
> > >>
> > >> Hello.-
> > >>
> > >> I've just got the game and played this weekend but I have a problem
> with
> > >the
> > >> resolution.
> > >>
> > >> I have a 3DBlaster Voodoo2 and the game recognizes it and works fine
at
> > >> 640x480.
> > >> But when I go and click on the resolution option to change it the
game
> > >hangs
> > >> up totally. I tried again and I waited, maybe the game was loading
> > >something
> > >> but nothing, all movement in the screen stops and the game hangs.
> > >>
> > >> How can I change the resolution? I would like to achieve 800x600.
> > >>
> > >> Thanks a lot.
> > >>
> > >> Daryoon
> > >> Lvl 2 Bard
> > >> Erollisi Marr
> > >>
> > >>
> > >>
> >
>
>> ------------------------------------------------------------------------
> > >> Campaign 2000 is here!
> > >> http://www.onelist.com
> > >> Discuss your thoughts; get informed at ONElist. See our homepage.
> >
>
>> ------------------------------------------------------------------------
> > >> Visit the EverQuest homepage at http://www.everquest.com
> > >>
> > >>
> > >
> > >
> >
>------------------------------------------------------------------------
> > >How many communities do you think join ONElist each day?
> > >http://www.onelist.com
> > >More than 1,000! Create yours now!
> >
>------------------------------------------------------------------------
> > >Visit the EverQuest homepage at http://www.everquest.com
> > >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 16
> > Date: Wed, 2 Jun 1999 11:41:31 +1000
> > From: Michael_Wyatt@...
> > Subject: Re: Changing Resolution
> >
> >
> >
> >
> > F10.
> >
> > Higher res is only of use when you are in either full screen or full
> screen
> > with boxes, all the screens that have borders stay at 640x480 instead of
> > becoming
> > larger.
> >
> > Note that if you are using 1024x768 in full screen with boxes and you
hit
> > "i" to go
> > into your inventory then it will either switch to 640x480 ( irritating )
> or
> > change to
> > a 640x480 blot in the middle of the 1024x768 display, depending on
whether
> > you
> > have the "same resolution" option set in the display preferences.
> >
> >
> >
> >
> >
> > "Steve Graham" <sdgraham@...> on 02/06/99 11:37:50
> >
> > Please respond to EverQuest@onelist.com
> >
> > To: EverQuest@onelist.com
> > cc: (bcc: Michael Wyatt/AU/AMP)
> > Subject: Re: [EverQuest] Changing Resolution
> >
> >
> >
> >
> > From: "Steve Graham" <sdgraham@...>
> >
> > i have a different kind of resolution problem...when i increase
> resolution,
> > it just makes the everquest window smaller on my monitor (with the
ensuing
> > negative border space increasing). anybody have an aswer for this one ?
> >
> > 4400 velocity STB 16meg Riva TnT
> > Viewsonic 17PS monitor
> >
> > thanks Gwin
> >
> >
> > -----Original Message-----
> > From: Tom Wang <twang@...>
> > To: EverQuest@onelist.com <EverQuest@onelist.com>
> > Date: Monday, May 31, 1999 11:22 PM
> > Subject: Re: [EverQuest] Changing Resolution
> >
> >
> > >From: "Tom Wang" <twang@...>
> > >
> > >simple, you're using old drivers. Goto www.3dfx.com and download the
> > newest
> > >Voodoo 2 reference drivers. It will fix all your problems.
> > >
> > >----- Original Message -----
> > >From: Su-chan <chuguet@...>
> > >To: <EverQuest@onelist.com>
> > >Sent: Monday, May 31, 1999 2:54 AM
> > >Subject: [EverQuest] Changing Resolution
> > >
> > >
> > >> From: "Su-chan" <chuguet@...>
> > >>
> > >> Hello.-
> > >>
> > >> I've just got the game and played this weekend but I have a problem
> with
> > >the
> > >> resolution.
> > >>
> > >> I have a 3DBlaster Voodoo2 and the game recognizes it and works fine
at
> > >> 640x480.
> > >> But when I go and click on the resolution option to change it the
game
> > >hangs
> > >> up totally. I tried again and I waited, maybe the game was loading
> > >something
> > >> but nothing, all movement in the screen stops and the game hangs.
> > >>
> > >> How can I change the resolution? I would like to achieve 800x600.
> > >>
> > >> Thanks a lot.
> > >>
> > >> Daryoon
> > >> Lvl 2 Bard
> > >> Erollisi Marr
> > >>
> > >>
> > >>
> >
>
>> ------------------------------------------------------------------------
> > >> Campaign 2000 is here!
> > >> http://www.onelist.com
> > >> Discuss your thoughts; get informed at ONElist. See our homepage.
> >
>
>> ------------------------------------------------------------------------
> > >> Visit the EverQuest homepage at http://www.everquest.com
> > >>
> > >>
> > >
> > >
> >
>------------------------------------------------------------------------
> > >How many communities do you think join ONElist each day?
> > >http://www.onelist.com
> > >More than 1,000! Create yours now!
> >
>------------------------------------------------------------------------
> > >Visit the EverQuest homepage at http://www.everquest.com
> > >
> >
> >
> > ------------------------------------------------------------------------
> > Have you entered ONElist's "Grow to Give" program?
> > http://www.onelist.com
> > Deadline is June 19. Join now to win $5000 for your charity of choice.
> > ------------------------------------------------------------------------
> > Visit the EverQuest homepage at http://www.everquest.com
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> > Message: 17
> > Date: Tue, 1 Jun 1999 22:07:23 EDT
> > From: BobbiS7@...
> > Subject: Re: Digest Number 59
> >
> > In a message dated 6/1/1999 5:14:11 AM Pacific Daylight Time,
> > EverQuest@onelist.com writes:
> >
> >
> > > Date: Mon, 31 May 1999 12:41:24 -0400 (EDT)
> > > From: Troy Kay <troy@...>
> > > Subject: Info on a guild website?
> > >
> > > Hey there, Hi there, Ho there, fellow EQ addicts:
> >
> > Well Met
> >
> > > I'm looking for a website that I stumbled across in my travels -- I
was
> > > there about 2 weeks ago and lost the URL. (No, it's not in my
> history.)
> > > It's a website for a dark elven guild that was really visually
> > > appealing... the graphics were done similarly to those in Neriak
(neon,
> > > transparent, etc) on a black background.
> >
> > http://www.neriak.com is a great starting spot.
> >
> > I also host the EQ_Neriak Mailing list here, if you have other
questions.
> >
> > Cleric Taven (Veeshan)
> >
> >
> >
>
____________________________________________________________________________
> ___
> >
>
____________________________________________________________________________
> ___
> >
> >
>
>
> ------------------------------------------------------------------------
> With more than 18 million e-mails exchanged daily...
> http://www.onelist.com
> ...ONElist is THE place where the world talks!
> ------------------------------------------------------------------------
> Visit the EverQuest homepage at http://www.everquest.com
>
>